Online Shop

(8 items) 1 page

DIY 2.4GHz Transmitter Module

$35.00
DIY 2.4GHz Transmitter Module Features of the FlyDream DIY Transmitter module include:- ¦15 band FHSS transmission gives excellent resistance to interference. ¦1024 step output ensures smooth and precise servo travel. ¦3dB antenna ensures even distribution of transmitted signal to avoid dead spots. ¦Suitable for all versions of non module based transmitters.

FD-IS84 2.4GHz Module for Futaba transmitters

$40.00
Features of the FlyDream Transmitter modules include:- ¦15 band FHSS transmission gives excellent resistance to interference. ¦1024 step output ensures smooth and precise servo travel. ¦3dB antenna ensures even distribution of transmitted signal to avoid dead spots. ¦Suitable for all versions of module based Futaba and Hitec transmitters. ¦A DIY module is available for transmitters that are not module based (JR, Graupner, Futaba, Hitec, Multiplex).

FD-IS8J 2.4GHz module for JR Transmitters

$40.00
2.4GHz module for JR Transmitters Features of the FlyDream Transmitter modules include:- ¦15 band FHSS transmission gives excellent resistance to interference. ¦1024 step output ensures smooth and precise servo travel. ¦3dB antenna ensures even distribution of transmitted signal to avoid dead spots. ¦Suitable for all versions of module based JR and Graupner transmitters. ¦A DIY module is available for transmitters that are not module based (JR, Graupner, Futaba, Hitec, Multiplex).

FD-IS4R 4 Channel Ultralight 2.4GHz Receiver

$36.00
4 Channel Ultralight 2.4GHz Receiver Features of the IS-4R Ultralight 4 Channel Receiver ¦Extremely small and light (24×15.1×5.6mm, 2.2.g) ¦Range >>450m on ground. ¦User set failsafe on all channels. ¦Fast relink time (~1sec) in the event of signal loss. ¦Resistant to brown out (continues to work down to much less than 2.8V) A 2.4GHz receiver that weights just 2.2g? Fly-Dream have launched their latest 2.4GHz 4 channel receiver. With standard servo pin spacing, PVC shrink-wrap packing makes it ultra light. It weighs less than 2.4g (the whole receiver and 7cm antenna together). It is one of lightest receivers in the world! The ultralight 4 Channel 2.4GHz receiver is "light" years ahead of the competition. I have tested range and to my surprise obtained a solid link at 740m!!!

FD-IS6R 6 Channel 2.4GHz Receiver

$38.00
6 Channel 2.4GHz Receiver ¦Full range, >>1200m on the ground. ¦User set failsafe on all channels ¦Fast relink time (~1sec) in the event of signal loss ¦Resistant to brown out (continues to work down to less than 2.8V). ¦Extremely small and light (34.2×18.4×8.7mm, 6g). These are terrific little recievers. Perfect for DLG and RES Gliders. They are my preferred DLG glider receiver, small, light, range greaterthan you can see the model.

FD-IS8R 8 Channel 2.4GHz Receiver

$40.00
8 Channel 2.4GHz Receiver ¦Full range, >1200m on the ground. Test show at least 1.2km range line of sight on ground. ¦User set failsafe on all channels ¦Fast relink time (~1sec) in the event of signal loss ¦Resistant to brown out (continues to work down to at least 2.8V, Bob Hickman reports <2.5V). ¦Extremely small and light (33×20.1×9mm, 7.0g).

FD-IS4RO 4 ch Micro Lite

$36.00
4 Channel receiver for indoor (or micro models outdoors).....weighs 1 gram. Operates from 2.2 - 9 V, draws 18mA. Has a range of 300m on the ground. Leaps small buildings in a single bound (just kidding, but it really is very good indeed). Uses micro JST connectors (a set come with the receiver). Recommended servos S2D5Micro

FD-IS4RO 4 ch Micro Lite + Servos

$55.00
The indoor flyers package. 1g 4 channel receiver (300m + range, operates from 2.2 - 9V, draws 18mA) with 2 2.5 g FlyDream servos with micro JST connectors and 4 micro JST connector pigtails.
(8 items) 1 page